BYD B90 (Autonomous Bus)

The BYD B90 AV is an 8.65-metre low-floor battery-electric autonomous single-deck bus manufactured by Chinese vehicle manufacturer BYD, with bodywork by Zhuhai Guangtong Vehicle Manufacture Co., Ltd.

The bus was exhibited at Singapore Urban Mobility Week (SUMW) 2026, held at Suntec Singapore Convention & Exhibition Centre in November 2026. Product information for the bus was published through a showcase listing ahead of the event.

The bus features a promotional wrap bearing BYD and MOGOX logos, along with public bus equipment such as Electronic Destination Signage (EDS) and Passenger Information Display System (PIDS).


Autonomous Driving System

The BYD B90 AV incorporates an SAE Level 4 autonomous driving system using LiDAR, cameras, radar and RTK-GNSS positioning, alongside cellular vehicle-to-everything (C-V2X) communications.

According to BYD, the bus features redundant drive-by-wire steering and braking systems, supported by backup power architecture designed to meet ISO 26262 ASIL-D functional safety requirements.

BYD and MOGOX were previously part of the consortium awarded the Land Transport Authority’s (LTA) Contract PT832 – Pilot Deployment of Autonomous Buses on Public Bus Services in October 2025, alongside MKX Technologies. Under the contract, six smaller BYD B70A02 autonomous electric buses were delivered to Singapore for planned deployment on public bus services under the LTA autonomous public bus pilot. However, these deployments were subsequently cancelled in October 2026.

The subsequent appearance of the larger B90 AV, featuring a promotional wrap bearing BYD and MOGOX logos, autonomous driving hardware and public bus equipment such as Electronic Destination Signage (EDS) and Passenger Information Display System (PIDS), is noteworthy. The intended operational role of the B90 AV has not been announced, and its relationship, if any, to the earlier autonomous public bus pilot remains unclear.


Vehicle

Following SUMW 2026, the BYD B90 was spotted with the registration plate SG7199C affixed, falling within the range of 50 registration numbers allocated to the BYD B12A05 buses under Contract PT602. It remains unclear whether this registration number is permanent.


Specifications
BYD B90 – Specifications
Dimensions 8.65 m (L) x 2.55 m (W) x 3.22 m (H)
Weights Gross Vehicle Weight: 9,600 kg
Manufacturer’s data plate: 14,300 kg;
Axle 1: 6,300 kg;
Axle 2: 8000 kg
Bodywork Zhuhai Guangtong Vehicle Manufacture Co., Ltd.
Assembled in Zhuhai, China
Battery BYD Blade Battery (LFP)
Capacity 290.28 kwh
Drivetrain Max Motor Rating: 280 kw
EDS Luminator Electronic Display Sign (EDS)
Full Colour LED. Luminator Basic driver controller.
PIDS Luminator SMART Passenger Information Display System (PIDS)
Interior-facing LCD screen and exterior-facing LCD screen
Additional interior LCD screen for autonomous driving perception display
Doors Masats
• Front single leaf inward gliding door
• Rear 2-leaf plug sliding door
Passenger Capacity 22 Seated
Not including 2 foldable seats, 1 wheelchair bay
Driver Assistance TNT Surveillance
– Integrated Display Screen
– T-CMS831 Camera mirror system
– Forward collision warning system & lane departure warning (T-FA Front Alert Camera)
– Side collision warning system (T-SA Side Alert Cameras)
– Anti-Fatigue system (T-DA Driver Alert Camera)
– Surround view camera system (T-A.I. 360°)
AV Technology Provider MOGOX (Zhidao Network Technology Co. Ltd.)
Other Specifications • Xinder EWR-TD03 2-in-1 Wheelchair Ramp
• Streamax P3 Automatic passenger counter
• Rear emergency exit hatch
• Electronic Handbrake
• Afutel Vehicle Interior Intercom
• 4x 50W Karaoke Amplifier

 


Exterior

The BYD B90 AV bus was built by Zhuhai Guangtong Vehicle Manufacture Co., Ltd., a contract manufacturer of buses based in Zhuhai, Guangdong, China. BYD supplies the bus chassis, while Zhuhai Guangtong assembles the completed bus in Zhuhai before delivery to Singapore. The bodywork design shares many similarities with the concurrent batch of PT602 public buses (the larger 12m BYD B12E03A) delivered to LTA by BYD. These features include full-colour Electronic Destination Signage (EDS) and a rear emergency exit hatch.

The bus is fitted with two passenger doors, comprising a single-leaf inward-sliding front entrance door and a double-leaf rear door equipped with an electrically operated wheelchair ramp.

The bus incorporates aesthetic elements such as triple-grouped headlights and taillights, and roof skirts that visually minimise the battery pack and air-conditioning unit for a sleek and modern appearance. The headlight/taillight design is similar to those used on Alexander Dennis buses—which Zhuhai Guangtong also manufactures under contract.

Finally, these buses also use camera mirror systems as standard, hence the absence of the usual wing mirrors.


Interior

The BYD B90 AV features a fully low-floor design for step-free access throughout the bus from the entrance to the exit. Multiple passenger intercom devices are fitted in the interior, allowing passengers to request assistance when needed.

Seats are upholstered in blue for general use (16 seats) and maroon for priority seating (6 seats). All seats comes with a two-point lap belt. 3 transverse facing seats are located above the front wheelarch, with the bus equipment rack on the other side.

The rear section of the bus has five seats behind the rear door, with a raised platform access.

Accessibility

There is one wheelchair bay in the bus for passengers travelling in wheelchairs (PIWs) or using personal mobility aids. It is located opposite the exit doors. There are two wall-mounted foldable seats at the side of the wheelchair bay. These foldable seats do not count towards the seating capacity. Pivoting handlebars, locked via an index plunger, can be deployed or stowed for convenience. The bus is fitted with a 2-in-1 wheelchair ramp, which can be deployed either manually or automatically.

 

Other Features

The BYD B90 bus is installed with Electronic Display Sign (EDS) and Passenger Information Display System (PIDS) units from Luminator.

Full-colour Electronic Display Signs (EDS) are fitted, including a larger rear display capable of showing the bus service number and destination.

The interior PIDS comprises three display screens: a front-mounted orange LED display showing basic bus service information, and a mid-mounted LCD screen providing additional information such as subsequent bus stops, and rail connections, as well as another LCD screen mounted behind the equipment rack to show information from the Autonomous technology provider. An external-facing LCD screen informs commuters about upcoming rail connections along the bus route.

USB Charging Ports are also installed at alternate seats.

Driver’s Cab

The bus is equipped with a Camera Mirror System in place of conventional wing mirrors, using exterior-mounted high-definition cameras to provide real-time footage on display screens in the driver’s cab. The system comprises three screens—two displaying views from the cameras replacing the conventional wing mirrors, and a third covering the bus’s front and left-side blind spots.


Gallery

References:

8 thoughts on “BYD B90 (Autonomous Bus)”

  • 20 November 2026 at 12:11 AM
    Permalink

    According to the chassis plate, it identifies as a B90G01

    Reply
  • 9 November 2026 at 1:09 PM
    Permalink

    The door closing sound is the same as the B12E03A and BC12A05. They were kind enough to let me film the doors

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *