Yutong E12 3-Door (LTA PT602 Production Batch)

Yutong E12 (3-door)
Yutong electric bus delivered to Singapore
Manufacturer Zhengzhou Yutong Bus Co., Ltd.
Bodywork Yutong (integral)
Years in operation 2026— (Expected)
Operators TBA
Technical Data
Length 12 metre
Motor Permanent magnet synchronous motor
Battery 465kWh LFP
Accessibility Low Floor
Emission Standard Zero tailpipe emissions

The Yutong E12 is a battery-electric, low-floor single-deck city bus produced by Chinese manufacturer Zhengzhou Yutong Bus Co., Ltd. (宇通客车).

In 2025, Singapore’s Land Transport Authority (LTA) ordered 100 units as part of a larger procurement of 660 electric buses under Contract PT602. The buses feature a three-door configuration and are assigned the registration numbers SG3781Y – SG3880U. Buses are expected to enter passenger service at the end of 2026.

The procurement supports Singapore’s broader transition to an electric public bus fleet, with LTA targeting half of the public bus fleet to be electric by 2030. Further information on Singapore’s electric bus rollout is detailed in the article Electric Buses in Singapore.


Manufacturer Background

Headquartered in Zhengzhou, Yutong is the world’s and China’s largest bus and coach manufacturer by volume. It has exported nearly 130,000 buses to more than 100 countries and regions, with over 10% of the global market share.

In the Yutong E12, Yutong delivers a standard 12-metre electric low-floor bus that has proven to be highly successful. Apart from domestic orders, Yutong E12 buses are deployed across many cities in Europe, the Asia-Pacific region, Latin America, and Central Asia.

In Singapore, Yutong previously supplied 10 Yutong E12 buses to Singapore under a previous 2018 LTA tender, alongside 10 Yutong E12DD buses. In 2025, it unveiled a new 3-door double-deck model for the Singapore market: the Yutong U12DD.

LTA Tender & Production Batch

In December 2025, Yutong International Trade Pte. Ltd. – Yutong Bus Co., Ltd Consortium was awarded Contract PT602E worth S$43.9 million for the supply of 100 single-deck electric buses. The order formed part of the LTA’s wider procurement of 660 electric buses under Contract PT602, which also involved Chinese manufacturers BYD, CRRC, and Zhongtong. Yutong supplied the Yutong E12 for this procurement, at an approximate unit cost of S$439,000 per bus.

A 3-door Yutong E12 bus was exhibited at Singapore Urban Mobility Week (SUMW) 2026, held at Suntec Singapore Convention & Exhibition Centre in November 2026.


Yutong E12 (3-Door) – Specifications
Vehicle Model Yutong ZK6128BEVG (E12)
Dimensions 11.97m (L) x 2.55m (W) x 3.25m (H)
Weights Max Total Mass: 19,000 kg
Tyre 275/70R22.5
Aircon Cooling capacity: 38000 kcal/h
Battery CATL Lithium iron phosphate (LFP) battery (Capacity 465.99 kwh)
EDS LECIP Electronic Display Sign (EDS)
Full Colour LED
PIDS LECIP Passenger Information Display System (PIDS)
Interior-facing LCD screen and exterior-facing LCD screen + LED Full Colour Text Display
Doors • Front 2-leaf inward gliding door
• Middle 2-leaf plug sliding door
• Rear 1-leaf plug sliding door
Passenger Capacity 31 Seated + 51 Standing = 82 Passengers
Not including 3 foldable seats, 2 wheelchair bays
Driver Assistance
TNT Surveillance
– Integrated Display Screen
– T-CMS831 Camera mirror system
– Forward collision warning system & lane departure warning (T-FA Front Alert Camera)
– Side collision warning system (T-SA Side Alert Cameras)
– Anti-Fatigue system (T-DA Driver Alert Camera)
– Surround view camera system (T-A.I. 360°)
Other Specifications • 2x DC CCS2 charging ports (Rated 300A)
• USB charging ports (USB-A & USB-C)
• Xinder EWR-TD03 2-in-1 Wheelchair Ramp
• Rear emergency exit hatch

Overview and Exterior

Yutong E12 buses are built by Yutong in Zhengzhou, China, and shipped to Singapore as a Complete Built-Up (CBU) vehicle. The exterior styling is largely consistent across Yutong E12 buses around the world, and thus very similar to the older batch of Yutong E12 buses that entered service in 2020.

The roof houses battery banks that are split into two compartments, separated by the air-conditioning pod in the middle. Electronic Display Signs (EDS) supplied by LECIP are full-colour units, and the rear EDS is now enlarged to slow visual alerts to other road users. A rear emergency escape hatch is also mandated since LTA’s PT601 bus orders in 2023.

Finally, these buses are also equipped with camera mirror systems as standard, replacing conventional wing mirrors during normal operation.


Interior

The Yutong E12 features a fully low-floor design for step-free access throughout the bus. LTA’s PT602 specifications require a three-door layout for ease of passenger movement, with the rearmost door located behind the rear axle, but at the cost of seating capacity.

Seats are upholstered in blue for general use (19 seats) and maroon for priority seating (12 seats). Notably, the LTA no longer designates the frontmost row of seats as priority seats.

 

The rear section accommodates a row of five passenger seats behind the third door, accessed via two steps from the main passenger aisle. A similar arrangement was previously adopted on the FTBCI trial bus, which accommodated four rear seats accessed via three steps. Unlike the double-leaf rearmost exit doors fitted to single-deck buses procured under Contract PT602, this bus features a single-leaf door.

Accessibility

LTA specifications call for two wheelchair bays for passengers travelling in wheelchairs (PIWs) or using personal mobility aids. Among the three single-deck bus designs under PT602, the Yutong E12 is the only one where both wheelchair bays are not located opposite the exit doors.

The first wheelchair bay (beside the middle door) has two wall-mounted foldable seats, while the second wheelchair bay (opposite the middle door) has one foldable seat integrated into the backrest. These foldable seats provide additional seating when wheelchair bays are not required by wheelchair users, and do not count towards the seating capacity.

Driver’s Cab

Contract PT602 buses come fitted with a Camera Mirror System in place of usual wing mirrors. Display screens located in the driver’s cab show real-time footage from high-definition cameras mounted on the exterior of the bus—where traditional wing mirrors are mounted.

The camera mirror system comprises three screens – two in place of the original wing mirrors, and a third for the bus’ left and front blind spots.


Gallery:
Delivery:

References:

11 thoughts on “Yutong E12 3-Door (LTA PT602 Production Batch)”

  • 10 November 2026 at 3:14 PM
    Permalink

    It is a very eco friendly bus and I am excited to see it running to replace the diesel scania and mb citaro units that have smoke

    Reply
  • 31 October 2026 at 11:18 PM
    Permalink

    I heard this is going to be showcased at SUMW

    Reply
  • 30 October 2026 at 12:56 PM
    Permalink

    should go to bukit panjang/choa chu kang/woodlands interchanges, there are almost no new buses there

    Reply
  • 29 October 2026 at 6:14 AM
    Permalink

    Outdated design.

    Reply
    • 29 October 2026 at 1:32 PM
      Permalink

      Agreed. Worst looking of the lot, CRRC>BYD>ZT>Yutong

      Reply
  • 28 October 2026 at 10:36 PM
    Permalink

    Basically, we are entering an era where all public buses are looking almost same already, and most of them are made in China, only difference is the brand. Kind of like Huawei, Xiaomi, OPPO and so on in the handphone industry.

    Now it seems only bendy buses haven’t imported EV version yet. I’m not sure whether China also has EV bendy buses or not.

    Reply
    • 29 October 2026 at 11:02 AM
      Permalink

      And everything will be lush green, no more operator liveries in the future.

      Reply
      • 31 October 2026 at 10:57 AM
        Permalink

        Just like Transport for London all Red except for the operator logo. Why can’t they use the headlight like the DD type?

        Reply
    • 29 October 2026 at 1:22 PM
      Permalink

      China brands most definitely have bendy buses e.g. CRRC C18, Yutong U18

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *